Skip to content
Wire&Watt

Industrial electricity, with Box Energy

What plants and cold storage sites pay for electricity, and the few hours that set much of it.

Industrial customers paid an average of 7.21 cents per kWh in Texas and 9.75 cents in Ohio in August 2026, every charge included (EIA). For a plant, the kWh price is only part of it: peak demand, a handful of summer peak hours and the tax treatment of each meter move the bill as much. Start with your business ZIP and add your bill now or later.

Industrial price, cents per kWh
  • Texas6.42 a year earlier7.21
  • Ohio8.47 a year earlier9.75
  • United States8.98 a year earlier9.64

EIA, August 2026; every charge included.

01How much manufacturing uses

Electricity is about a sixth of the energy US plants burn or buy.

US manufacturers used 784 billion kWh of net electricity in 2022, about 17% of the energy they consumed as fuel, according to EIA's Manufacturing Energy Consumption Survey. Eight industries account for most of it.

Net electricity is what plants buy or generate from renewables, minus what they sell; power generated on site from fuel is counted as that fuel. Source: EIA MECS 2022, tables 3.1 and 3.2.

Net electricity use by manufacturing industry, 2022, billion kWh
Industry (NAICS)Billion kWh, 2022
Chemicals (325)149.9
Primary metals (331)99.5
Food (311)79.6
Plastics and rubber (326)70.5
Nonmetallic minerals (327)61.8
Paper (322)49.7
Petroleum and coal (324)46.8
Transportation equipment (336)46.5

02Reading a plant's bill

Four things decide what a site pays, before any supply contract.

The supply price is one line. For a site with real load, these set the rest, and each has its own guide.

03Peak hours

A few summer hours set a year of charges.

In both Texas and Ohio, part of a large site's bill for the whole year is fixed by its load in a handful of grid peak hours the summer before.

Texas: 4CP

Four 15-minute intervals set transmission charges.

  • At Oncor, a site that has reached 700 kW of demand in any month is billed transmission on its 4CP demand: its average load in the ERCOT system’s peak 15 minutes of June, July, August and September.
  • The figure is updated each January 1 and stays fixed for the calendar year, so the summer just gone decides next year’s transmission line.
ERCOT 4CP: 2025 peak dates, the formula and who pays

Ohio: the capacity tag

Five peak hours set the capacity a site pays for.

  • PJM, the grid operator for Ohio, takes the five highest weekday peaks from June 1 to September 30. Each utility sets every site’s share, its peak load contribution or tag, from its load in those hours.
  • At Ohio Power, tags take effect each June 1 and stay fixed for the year. A site that cuts its own load in a peak hour gets a lower tag; a cut made under a PJM demand response program is added back.
What a tag costs: PJM’s capacity auction price, dollars per MW of tag per day, for the year from each June 1.
2025/20262026/20272027/20282028/2029
$269.92$329.17$333.44$325.00

At $329.17 a day, each MW of tag comes to about $120,147 for the year from June 2026, against $98,521 at $269.92: our arithmetic from PJM’s auction results. A supplier passes it on in the price or as its own line, so ask which.

04Tax

The tax on a plant's power depends on the state, and in Texas on each meter.

As read on November 4, 2026 from the Texas Comptroller and the Ohio Department of Taxation. This is how the rules work, not tax advice for your site.

Texas

Power used in production can be exempt from sales tax.

  • Tax Code section 151.317 exempts electricity and gas that power exempt manufacturing equipment, and that light, cool and heat the manufacturing area during production. The exemption covers state sales tax and city and county sales tax.
  • Each meter is all exempt or all taxable: exempt if more than half of its use qualifies. Offices, storage, break rooms and research areas count as taxable support areas.
  • The proof is a predominant use study of 12 consecutive months, certified by a registered engineer or someone with an engineering degree, and by the owner, on file before you give the utility or retail provider the exemption certificate on form 01-339.
  • Tax already paid can generally be claimed back for four years. The Comptroller says to ask the seller first.

Ohio

No sales tax on electricity; a kWh tax instead.

  • The utility collects the kilowatt-hour tax on each month’s use: 0.465 cents per kWh on the first 2,000 kWh, 0.419 cents on the next 13,000 and 0.363 cents on everything above 15,000.
  • On 100,000 kWh in a month that comes to about $372, or 0.37 cents per kWh: our arithmetic from the tiers.
  • A location using at least 45 million kWh a year can register as a self-assessing purchaser and pay the state directly: 0.257 cents per kWh on the first 500 million kWh and 0.183 above, with a $500 fee per location each year, applied for by May 1.

05Cold storage

A refrigerated warehouse uses about 5.6 times the electricity of a dry one.

Refrigeration runs around the clock, so a cold store's use is high and steady day and night: a high load factor, the load shape a supplier looks at when it prices a site.

per square foot a year, refrigerated warehouses
29.6 kWh
per square foot a year, refrigerated warehouses
per square foot a year, warehouses without refrigeration
5.3 kWh
per square foot a year, warehouses without refrigeration
average size of a refrigerated warehouse
94,800 sq ft
average size of a refrigerated warehouse
average use per refrigerated warehouse a year
2.8 million kWh
average use per refrigerated warehouse a year

EIA, Commercial Buildings Energy Consumption Survey 2018, table C22, the latest. EIA sampled few refrigerated warehouses, so its margin of error on the per-square-foot figure is about 19%. ENERGY STAR puts the national median at 84.1 kBtu per square foot of site energy.

06Paid to cut load

Both grids pay large sites to stand ready to use less.

A plant or cold store that can shed load for a while can be paid for being available. Both programs run through a third party, and both expect the cut when called.

Texas: ERCOT Emergency Response Service

  • ERCOT pays a capacity payment to sites that agree to cut load within 10 or 30 minutes when grid reserves run short.
  • Contracts run for four terms a year: December to March, April to May, June to September and October to November.
  • Sites take part through a qualified scheduling entity and can be grouped to reach the minimum offer. Deployment is capped at 24 hours in total per term.

Ohio: PJM demand response

  • Sites commit through a curtailment service provider to reduce load when PJM calls, and are paid for being available over a year from June 1.
  • A site that doesn’t cut when called pays a penalty. From the 2027/2028 year, the commitment covers every hour of the year.
  • Reductions that are part of normal operations are not paid.

07Before a quote

What to have ready for an industrial quote.

  1. 01

    Twelve months of bills

    Every page of each meter's bills, or the interval data behind them. Suppliers price a large site on its load shape, not one month.

  2. 02

    Your meter numbers

    The ESI ID on a Texas bill, the account or customer number on an Ohio one, one per meter.

  3. 03

    Your peak figures

    The 4CP kW on a Texas bill, or the capacity tag your utility or supplier holds for an Ohio site. They change each year.

  4. 04

    Your tax status

    Whether each meter is billed sales tax or exempt, and the certificate on file. A quote should be compared before tax.

  5. 05

    Your contract end date

    The date and the notice the current contract needs. A new term usually starts when the old one ends.

  6. 06

    Changes coming

    A new line, a shift added or a building closing changes the load a supplier prices. Say so before the quote, not after.

Free bill review

Start your rate comparison.

Leave your business ZIP, business name and email. Add your bills now, or use the private link we email you later. Quotes follow once we have complete bills and confirm your service addresses.

  • No fee. The supplier you choose pays us.
  • No bill needed to start. Add every page when you have it.
  • Nothing changes without your signature.

Have your electricity bill ready?

Add it here so we can compare your rate. PDF, photos or screenshots work.

No bill handy? Start with the details below. Your kWh and rate are enough for first prices.

No bill needed to start. We’ll email you a link to add it later. No fee or commitment to switch.

We use what you send only to review your services and contact you about them. We never sell it. See our privacy policy and terms.

08FAQ

Questions manufacturers ask about electricity

Something else? partner@wireandwatt.com

What is the average industrial electricity rate?

Industrial customers paid an average of 7.21 cents per kWh in Texas, 9.75 cents in Ohio and 9.64 cents across the US in August 2026, every charge included, according to EIA. That was 12%, 15% and 7% more than a year earlier. The average mixes plants of every size and voltage, so it is a benchmark, not a quote for one site.

Is electricity used in manufacturing exempt from sales tax in Texas?

It can be. Texas Tax Code section 151.317 exempts electricity and gas used to power exempt manufacturing equipment, and for lighting, cooling and heating in the manufacturing area during production. One meter that serves both exempt and taxable uses is either fully exempt or fully taxable, depending on whether more than half of its use is exempt, shown by a predominant use study covering 12 consecutive months. You then give the exemption certificate on form 01-339 to the company that bills you.

Can a Texas manufacturer get back sales tax already paid on electricity?

Generally for up to four years from when the tax was due. The Comptroller says to ask the seller for the refund first; the seller either refunds it or assigns you the right to claim it directly. A study made after the fact has to account for changes in equipment and floor space over the period, and a study that can't be verified independently is not accepted.

Does a cold storage warehouse qualify for the Texas exemption?

Not on storage alone, as the rule reads. Comptroller Rule 3.295 lists storage areas among the manufacturing support areas whose lighting, cooling and heating are taxable, alongside offices and break rooms. A plant that processes food and also refrigerates its product needs a study of each meter. Ask the Comptroller or a tax adviser about your own site before you file a certificate.

What is a capacity tag, or peak load contribution?

In the PJM grid, which includes Ohio, each site's share of the summer peak is called its peak load contribution, or tag. The utility sets it from the site's load in the five highest grid peak hours from June to September, and it fixes the capacity cost the site carries from the next June 1 for a year. A site that uses less in those hours carries a smaller tag.

How much electricity does a refrigerated warehouse use?

About 29.6 kWh per square foot a year on average, according to EIA's 2018 building survey, against 5.3 kWh for a warehouse without refrigeration. The average refrigerated warehouse in the survey covered about 94,800 square feet and used about 2.8 million kWh a year. The survey sampled few of them, so EIA's margin of error on the figure is about 19%.

Do Ohio businesses pay sales tax on electricity?

No. The Ohio Department of Taxation lists electricity among the utilities that are not subject to sales tax. Ohio charges a kilowatt-hour tax instead, collected by the utility: 0.465 cents per kWh on the first 2,000 kWh a month, falling to 0.363 cents above 15,000. A location using at least 45 million kWh a year can register to pay it directly at a lower rate.

Before you choose

Before you compare.

Contract timing

Business electricity contract renewal: when it ends

What happens when a Texas business electricity contract ends: the 14-day notice and no-penalty rules for small accounts, and how early to lock the next term.

Read the guide
Quote comparison

How to compare commercial electricity quotes

Line up business electricity quotes on the same basis: same meter, usage, start date and term, what each rate includes, and what to check before you sign.

Read the guide
Bill basics

How to read a commercial electricity bill (Texas)

Usage, supply, delivery, demand and taxes: what each line on a business electric bill means, which one a new contract changes, and what to have ready.

Read the guide
Demand charges

Demand charges: what they are and how to lower them

Why a business pays for its busiest 15 minutes of the month, how demand differs from usage, what a ratchet and 4CP do, and how to lower the peak. Texas rules.

Read the guide
Delivery charges

Oncor TDU delivery charges for businesses (2026)

What each Oncor delivery charge pays for, why 2026 business bills changed (new rates June 1, a surcharge from August, riders October 4) and the 80% ratchet.

Read the guide
Calculator

Oncor demand ratchet calculator

Work out the demand Oncor bills a Texas business this month: the 80% ratchet, its 20 kW and 25% load factor exemptions, and your load factor band.

Read the guide
Delivery charges

CenterPoint TDU delivery charges for businesses (2026)

What each CenterPoint delivery charge on a Houston business bill pays for, why it's billed in kVA, the 2026 rider changes, and how it differs from Oncor.

Read the guide
Prices and charges

Texas commercial electricity prices and delivery charges

What Texas businesses pay for electricity on average (EIA, monthly) and the current Oncor and CenterPoint business delivery charges, dated to each tariff.

Read the guide
Rate types

Fixed vs variable business electricity rates in Texas

What each rate type lets a Texas supplier change, why sites under 50 kW can only buy fixed or variable, and what to ask about an indexed plan.

Read the guide
Load factor

Electricity load factor: how to calculate it, and what's good

Load factor compares a business's average electricity demand with its peak. Calculate it from three numbers on your bill, see what counts as good, and how to raise it. Calculator.

Read the guide
Bill basics

ESI ID: what it is and how a Texas business finds it

The ESI ID identifies each electricity service point in Texas: what it looks like (17 or 22 digits), where it is on the bill, and how to look it up.

Read the guide
Demand

ERCOT 4CP: 2025 peak dates, the formula and who pays

A site's average demand at ERCOT's four summer peaks: the 2025 peak dates, the formula worked through, who pays at Oncor and CenterPoint, and how to lower it.

Read the guide
Demand

Power factor charges in Texas: the 95% rule

Power factor is kW divided by kVA. Below 95%, Oncor, AEP Texas and TNMP can raise billed demand, and CenterPoint bills in kVA. The rule, an example, the fix.

Read the guide
Delivery charges

TDU delivery charges in Texas: what businesses pay

What TDU delivery charges are, which Texas utility serves your site, every AEP Texas and TNMP business charge, and a calculator that checks a month's bill.

Read the guide
Data

Oncor vs CenterPoint vs AEP vs TNMP delivery charges

What the same business pays each month for delivery from Oncor, CenterPoint, AEP Texas and TNMP, at three site sizes, from current tariffs. Download the CSV.

Read the guide
Basics

Commercial electricity: what it is, how it's billed and what businesses pay

What makes electricity "commercial", how a business bill differs from a home one, whether it costs less per kWh, and what a restaurant, hotel or store pays a month, from EIA data for August 2026.

Read the guide
Data

Commercial electricity prices by state, per kWh (August 2026)

What businesses pay for electricity in every state and DC: EIA's commercial average per kWh for August 2026, the change in a year and since 2020, and industrial and residential for comparison. Download the CSV.

Read the guide

Sources

  1. 01U.S. Energy Information Administration, Electric Power Monthly, Table 5.6.A: average price of electricity by sector and state (August 2026 and 2025)(opens in a new tab)
  2. 02U.S. EIA, Manufacturing Energy Consumption Survey 2022, Table 3.1: electricity by industry (million kWh)(opens in a new tab)
  3. 03U.S. EIA, Manufacturing Energy Consumption Survey 2022, Table 3.2: fuel consumption by industry (trillion Btu)(opens in a new tab)
  4. 04U.S. EIA, MECS terms and definitions (net electricity)(opens in a new tab)
  5. 05Oncor Tariff for Retail Delivery Service, 6.1.1 (4CP demand and the transmission cost recovery factor, sheets effective June 1, 2026)(opens in a new tab)
  6. 06PJM Manual 19: Load Forecasting and Analysis, section 4.3, peak load allocation (5CP) (revision 39, June 30, 2026)(opens in a new tab)
  7. 07Ohio Power Company (AEP Ohio): supplier settlement policies, capacity tags (revision October 2026)(opens in a new tab)
  8. 08PJM: 2026/2027 Base Residual Auction report (July 22, 2025)(opens in a new tab)
  9. 09PJM: 2027/2028 Base Residual Auction report (December 17, 2025)(opens in a new tab)
  10. 10PJM: 2028/2029 Base Residual Auction results report (July 14, 2026)(opens in a new tab)
  11. 11Texas Tax Code, Chapter 151, section 151.317: gas and electricity used in manufacturing or processing(opens in a new tab)
  12. 12Texas Comptroller Rule 3.295, Natural Gas and Electricity (34 TAC 3.295): predominant use study(opens in a new tab)
  13. 13Texas Comptroller: sales tax refunds FAQ (predominant use, more than 50 percent)(opens in a new tab)
  14. 14Texas Comptroller Publication 94-124: manufacturing exemptions(opens in a new tab)
  15. 15Texas Comptroller Form 01-339: sales and use tax resale certificate and exemption certification(opens in a new tab)
  16. 16Texas Tax Code, Chapter 111, sections 111.104, 111.107 and 111.201: refund claims and the four-year limit(opens in a new tab)
  17. 17Texas Comptroller: sales tax refunds (ask the seller first, forms 00-985 and 00-957)(opens in a new tab)
  18. 18Ohio Department of Taxation: sales and use tax taxability (electricity not taxable)(opens in a new tab)
  19. 19Ohio Department of Taxation, form KWH 2B: kilowatt-hour tax rates(opens in a new tab)
  20. 20Ohio Department of Taxation, form KWH 3: self-assessing purchaser application(opens in a new tab)
  21. 21U.S. EIA, CBECS 2018, Table C22: electricity consumption and intensity by building activity subcategory (refrigerated warehouses)(opens in a new tab)
  22. 22ENERGY STAR Portfolio Manager: U.S. energy use intensity by property type (August 2024)(opens in a new tab)
  23. 23ERCOT: Emergency Response Service (ERS)(opens in a new tab)
  24. 24ERCOT: ERS technical requirements, December 2026 to March 2027 (September 18, 2026)(opens in a new tab)
  25. 25Texas PUC Substantive Rule 25.507: Electric Reliability Council of Texas emergency response service(opens in a new tab)
  26. 26PJM: demand response fact sheet (June 2, 2026)(opens in a new tab)
  27. 27PJM: demand response fact sheet for end-use customers(opens in a new tab)